Professional Compact Laminate Lab Table Tops From China

CHEMICAL LAB TABLE TOP

Colour fastness under artificial light

PRODUCT INFORMATION

Product name:chemical lab table top 

Avaliable Sizes: 

 1220 * 1830 * (4 '6'), 1220 * 2440 * (4 '8'), 1220 * 3660 * 12 (4 ', ') 1300 * 2800 * (4.3 '9'), 1300 * 3050 (4.3 * 10 ' ') 1530 * 1830 * (5 '6'), 1530 * 3050 (5 '*') 10, 1530 * 3660 * 12 (5 ') 1830 * 1830 * (6 '6 "), 1830 * 2440 * (6' 8 '), 1830 * 3660 * 12 (6 ' '), 1830 * 4270 * (6 '14') 

Common Colors: gray, white, green, black and others 

Common Thickness: 12.7mm, 15mm, 16mm 

Common Surface treatment: texture 

Application: 

 1)Cabinets,case work,counters and coutertops in chemistry,biology and pharmaceutical laboratories 

 2)Hospitals,medical/dental examination rooms 

 3)Dialysis centers 

 4)Nurses’ stations and pathologists’ work rooms 

 5)School labs 6)Photography labs and darkrooms 

 7)Beauty salons 

 8)Product testing facilities

Composition of POLYBETT^® Chemical Resistant Laminate

1.Chemical-resistant Film 2.Coloured paper impregnated with Melamine Resin 3.Layers of kraft paper impregnated with Phenolic Resin

Features of POLYBETT^® Chemical Resistant Laminate

1.Resistance To Acid And Alkaline 2.Resistance To Corrosion 3.Wear Resistance 4.Impact Resistance 5.Heat-Resistant 6.Cigarette Burn Resistant 7.Easy To Clean

Storage condition 

1.Environmental requirement:Ensure appropriate acclimatization between plastic laminate and substrate prior to fabrication.condition plastic laminate and substrate surfaces in the same environment for 48 hours prior to fabrication.Condition at approximately 75 degree F(24 deg C) and 45 percent to 55 percent relative humidity. 

2.Adhesive:for best results,apply adhesives at temperature at or above 65 deg F(18 deg F). 

3.During the storage and transport, compact laminate should be placed on the plate whose size is slightly larger than boards. 4.A plate should be placed between the pallet and the boards and a cover plate should be put above the boards. 5.Compact laminate could not be stored near the door. 6.Compact laminate could not be stored in a too wet or hot environment 7.Compact laminate should be placed at least 72 hours before being processed or installed, so the sheet and the environment could achieve the balance.

Maintenance Instructions 

1. Do not allow more than 96% sulfuric acid or nitric acid to contact with corrosion-resistant physical and chemical plates for more than 5 hours. 

2. Do not direct the non-conventional test reagents to the corrosion-resistant physical and chemical plate. 

3. Do not directly contact the corrosion-resistant chemical and physical properties with heat-dried glassware, gas stove, alcohol stove or melted metal, spark and other objects that can not be known at temperatures above 180 ° C. 

4. After the experiment is finished, remember to wipe the table clean, in order to avoid residual acid, alkali solvent prolonged contact lead to damage. 

5. Do not use acid, alkaline or corrosive cleaning agents to clean the corrosion-resistant physical and chemical plate, for stubborn stains, can be washed immediately with hypochlorous acid rinse with water. If the hypochlorite is dropped on the surface of the test bench for too long, the surface of the panel will be discolored or the stain will be more easily adhered to the panel.

Handling

Compact laminate is lifted vertically to avoid scratching. It is better to use the vacuum chuck to lift the boards.

PRODUCT ADVANTAGES

01.TIGHT AND NON-PERMEABLE SURFACE, SO THAT WATER AND DUST ARE NOT EASY TO STICK TO IT

Waterproof and moisture-proof: water does not go into the core material

02.RESISTANT TO CIGARETTE BURN 

Heat resistant, Fire-resistant and flame-retardant:

it is difficult to catch fire when exposed to open flame or high temperature

03.EASE OF MAINTENANCE

Special surface structure is easy to clean

Scratch resistant, Impact Resistant, Abrasion resistant

APPLICATION

Application: For hospital. laboratory table top. testing center. medical working table、 

                    dialysis centers、 product testing facilities、 nurses' stations and pathologists' work rooms

1.Raw materials: resin powder + natural stone powder (incoming material inspection)

2.Impregnant with melamine and phenolic resin

3.Assembling paper

4.Hot pressing (core process)

5.Cutting

6.Quality Inspection,package (finished product inspection)

COMPANY INFORMATION

Changzhou City Zhongtian Fire-Proof Decorative Sheets Co., Ltd. is one of  China's largest manufacturers in producing SPC,PVC,WPC,TEEL FLOOR,HPL,Compact laminate. It covers an area of 40,000 square meters and more than 200 professional workers. We have various certificates like FSC,CE,ISO9001,SGS certificate and various European certificates. Over the years we collected rich experiences and established the famous brands,"Zhongtian",”Polybett”, our unique design concepts and individualized styles are famous in the domestic and oversea industry.

FAQ

1.Q: Are you trading company or manufacturer ? 

 A: We are factory. 

2.Q: How long is your delivery time? 

 A: Generally it is 5-10 days if the goods are in stock. or it is 20-25 days if the goods are not in stock, it is according to quantity. 

3.Q: Do you provide samples ? is it free or extra ? 

 A: Yes, we could offer the sample for free charge but do not pay the cost of freight. 

4.Q:What is your terms of payment? 

 A: 1.T/T 30% as deposit, and 70% pay against the copy of B/L.     2.L/C at sight.     3.D/P at sight. 

5.Q. What is your terms of delivery? 

 A: EXW, FOB, CFR, CIF.